company name slash logo burger menu for mobile

HAWK BRAKE PAD KIT, C5/C6(Z51), FRONT, HPS

Hawk Performance #HB247F.570 HPS Brake Pads

Hawk Performance HPS brake pads are designed to ensure performance, safety, and quality on the street. Hawk Performance unique ferro-carbon HPS compound provides advanced braking characteristics to enhance your driving experience. This unique compound combines the safety and quality of aerospace design with the braking technology of motorsports.

Features:
  • Increased stopping power versus most OE pads (FF)
  • Gentle on rotors
  • Extended pad & rotor life
  • Low dust
  • Virtually noise-free w/ OE grade noise dampening system
  • FMSI D731
Applications:
  • 1997-2004 C5(Z06) Corvette
  • 2004-2009 Cadillac XLR
  • 2005-2013 C6 Corvette
  • 2005-2013 C6 Z51 Corvette
Brake Pad Installation Procedure:
  • Install brake pads with proper hardware, shims, etc.
  • Locate the pads with wear indicators on the piston side of the calipers in a floating-caliper application.
  • Flush and bleed the system with fresh brake fluid.
  • Check all hydraulic parts for excess wear and tear and replace/repair as needed.
  • Check disc for proper thickness, parllelism and lateral run out.
  • Check disc for circumferential scoring or grooving over .012" depth across the friction surface and replace or resurface as required.
  • If disc does not require replacement or resurfacing, then the contamination from the previous pads must be removed if you're changing compounds. Sand discs with 130-160 grit sandpaper using moderate pressure. Clean disc with soap and water to remove residue from sanding as well as any oil, grease or brake fluid.
  • Inspect calipers for freedom of movement and repair or lubricate where needed
Burnishing/Bedding Instructions:
  1. After installing new brake pads per the Hawk installation instructions, make 6-10 stops from approximately 30-35 MPH applying moderate pressure.
  2. Make an additional 2-3 hard stops from approximately 40-45 MPH.
  3. Do not drag the brakes at any time or come to a full stop with your foot on the brake pedal between stops above.
  4. Allow at least 15 minutes for the brakes to cool down.
  5. Your new Hawk pads should be bedded-in and ready for use.
Price: $149.00
Quantity:
KORE3 News:

Notice: KORE3 is currently stocking reproduction C6 and C6 Z51 2-piston front and 1-piston rear calipers, they're on hand and ready to ship. Please contact us with any questions.


KORE3 is a proud dealer for Hydratech Braking Systems™, the industry leader in hydraulic brake assist conversions for the pro-touring market. Please plan for approximately 90-120 day deliveries on all hydroboost units until further notice.

Upcoming Closures:

January 15th

March 5th-6th (No Phone)

March 25th


If you call us after business hours, or during a closure, we will return your call as soon as we can upon our return. Please Email us at info@kore3.com if you would like a quicker response.