The KORE3 Ø355mm C6 Z06 Front Big-Brake Kit for the Chevy C10, 71-76 Impala and other compatible applications adapts the C6 Z06 brake components to your vehicle. Please refer to the KORE3 Big-Brake Application Chart for details regarding specific vehicle compatibility.
This KORE3 kit includes massive C6 Z06 rotors, measuring Ø355mm x 32mm thick (Ø14.0" x 1.26") with either directional or pillar vane construction, providing the highest brake torques, most thermal mass, improved feel and better cooling for more aggressive, sustained driving without brake fade.
The C6 Z06 front calipers are of a 6-piston, monobloc design with a patented pad-per-piston design such that each piston has its own dedicated pad. This feature reduces the development of tapered pad wear commonly experienced by longer pads in similar applications. Due in part to the unique pad design, the calipers utilize cast-in bridge sections for maximum rigidity and overall stiffness resulting in improved pedal feel and pad wear.
There is excellent aftermarket support for C6 Z06 rotors and brake pads to suit nearly anybody's needs and/or budget. This Ø355mm KORE3 big-brake kit is an easy upgrade from the base level Ø325mm and Ø340mm kits and adds even more thermal capacity for those who push their cars up to and beyond the limits. Any C10 running Ø18" or larger wheels with adequate caliper clearance can benefit from the addition of this kit, whether you're grocery-getting, pro-touring, or a little bit of both.
- KORE3 Big-Brake Kit for GMPU C10 trucks is compatible with all 1971-1987 C10 disc spindles, OE or aftermarket. The "HD" spindles use SET5 (1.375") inner wheel bearings and SET3 (.844") outer wheel bearings and were equipped with 1.25" thick factory rotors. The "LD" spindles use SET 6 (1.25") inner and SET3 (.844) outer wheel bearings and were equipped with 1" thick rotors. The CPP 2" Modular Drop spindles are unique, so choose the appropriate spindle in the options below.
- Kit installation requires moderate, irreversible spindle modifications with basic metal fabrication tools on all but the CPP Modular spindle. All necessary modifications are detailed in the instructions.
- Minimum Ø18" wheels are required depending on rotor size and caliper selection. Not all Ø18" wheels will fit. Please verify fitment prior to ordering using the appropriate KORE3 fitment template. Wheel fitment is the buyer's responsibility. Please contact us if you have any questions regarding your specific application or the proper use of the templates.